Timber Support Glazing Bar Extra End Cap - Image 1
Click to enlarge
Brown glazing bar
Brown Timber Support Glazing Bars Price range: £18.36 through £64.38 Including VAT
Back to products
White glazing bar
White Timber Support Glazing Bars For 25mm & 35mm Polycarbonate Price range: £32.71 through £78.54 Including VAT

Timber Support Glazing Bar Extra End Cap

Price range: £2.59 through £3.74 Including VAT

SKU: N/A Category:
Additional information
ColourWhite, Brown, Anthracite Grey

Related products

White glazing bar

White Timber Support Glazing Bars

Price range: £18.36 through £64.38 Including VAT
Fitting & Usage – Exitex Capex Snap Down Glazing Bar
Quick Installation Guide
(General guide – not full fitting instructions)
  1. Cut to Length – Trim Base Bar and Top Capping to match the polycarbonate sheet.
  2. Fit Gaskets – Insert EPDM rubber gaskets along each side of the Base Bar.
  3. Pre-Drill & Fix – Drill fixing holes max 500mm apart (within 100mm of ends) and screw Base Bar to rafters with 5mm wood screws.
  4. Prepare Sheets – Remove protective film from sheet edges.
  5. Snap on Top Capping – Push legs into the Base Bar up-stand to form a tight seal.
  6. Seal Ends – Apply silicone under end closure and End Cap top lip, then fit firmly.
Tips:
  • Allow 50mm sheet overhang into gutter.
  • Deduct 21mm from rafter centres for expansion.
  • Use fixing buttons for large or exposed areas.
  • Works best on roofs over 5° pitch.
Select options This product has multiple variants. The options may be chosen on the product page
Quick view
Brown glazing bar

Brown Timber Support Glazing Bars

Price range: £18.36 through £64.38 Including VAT
Fitting & Usage – Exitex Capex Snap Down Glazing Bar
Quick Installation Guide
(General guide – not full fitting instructions)
  1. Cut to Length – Trim Base Bar and Top Capping to match the polycarbonate sheet.
  2. Fit Gaskets – Insert EPDM rubber gaskets along each side of the Base Bar.
  3. Pre-Drill & Fix – Drill fixing holes max 500mm apart (within 100mm of ends) and screw Base Bar to rafters with 5mm wood screws.
  4. Prepare Sheets – Remove protective film from sheet edges.
  5. Snap on Top Capping – Push legs into the Base Bar up-stand to form a tight seal.
  6. Seal Ends – Apply silicone under end closure and End Cap top lip, then fit firmly.
Tips:
  • Allow 50mm sheet overhang into gutter.
  • Deduct 21mm from rafter centres for expansion.
  • Use fixing buttons for large or exposed areas.
  • Works best on roofs over 5° pitch.
Select options This product has multiple variants. The options may be chosen on the product page
Quick view
Grey glazing bar

Anthracite Grey Timber Support Glazing Bars

Price range: £25.56 through £61.38 Including VAT
Exitex Capex Snap Down Glazing Bar (10–25mm) – Choice of Colour and Length Grey Timber Support Glazing Bar Low cost,
Select options This product has multiple variants. The options may be chosen on the product page
Quick view
White glazing bar

White Timber Support Glazing Bars For 25mm & 35mm Polycarbonate

Price range: £32.71 through £78.54 Including VAT
Exitex Capex Snap Down Glazing Bar (25–35mm) – Choice of Colour and Length White 25-35mm Glazing Bar Low cost, high
Select options This product has multiple variants. The options may be chosen on the product page
Quick view
Aluminium F-Section

Aluminium F-Section For Polycarbonate Sheets

Price range: £30.96 through £92.40 Including VAT
Aluminium F-Section
Select options This product has multiple variants. The options may be chosen on the product page
Quick view

UPVC F-Sections for Polycarbonate Sheets

Price range: £11.54 through £15.96 Including VAT
Select options This product has multiple variants. The options may be chosen on the product page
Quick view

33 Metres of Aluminium Solid Tape

Price range: £4.50 through £6.98 Including VAT
Select options This product has multiple variants. The options may be chosen on the product page
Quick view

Lean To Flashing Profile (For roof pitches 5 – 45°)

Price range: £94.82 through £197.34 Including VAT
Our Lean to flashing profile gives a neat finish to the top edge or a lean-to roof installation and provides a flat upstand to flash onto with lead or butyl flashing.
Select options This product has multiple variants. The options may be chosen on the product page
Quick view