33 Metres of Aluminium Solid Tape - Image 1
Click to enlarge
Pack of 10 Fixing Buttons
Pack of 10 Fixing Buttons £4.98 Including VAT
Back to products
33 Metres of Anti Dust Breather Tape
33 Metres of Anti Dust Breather Tape Price range: £8.48 through £15.08 Including VAT

33 Metres of Aluminium Solid Tape

Price range: £4.50 through £6.98 Including VAT

SKU: N/A Category:
Additional information
Polycarbonate Thicknesss4mm/6mm, 10mm, 16mm, 25mm

Related products

White glazing bar

White Timber Support Glazing Bars

Price range: £18.36 through £64.38 Including VAT
Fitting & Usage – Exitex Capex Snap Down Glazing Bar
Quick Installation Guide
(General guide – not full fitting instructions)
  1. Cut to Length – Trim Base Bar and Top Capping to match the polycarbonate sheet.
  2. Fit Gaskets – Insert EPDM rubber gaskets along each side of the Base Bar.
  3. Pre-Drill & Fix – Drill fixing holes max 500mm apart (within 100mm of ends) and screw Base Bar to rafters with 5mm wood screws.
  4. Prepare Sheets – Remove protective film from sheet edges.
  5. Snap on Top Capping – Push legs into the Base Bar up-stand to form a tight seal.
  6. Seal Ends – Apply silicone under end closure and End Cap top lip, then fit firmly.
Tips:
  • Allow 50mm sheet overhang into gutter.
  • Deduct 21mm from rafter centres for expansion.
  • Use fixing buttons for large or exposed areas.
  • Works best on roofs over 5° pitch.
Select options This product has multiple variants. The options may be chosen on the product page
Quick view
Brown glazing bar

Brown Timber Support Glazing Bars

Price range: £18.36 through £64.38 Including VAT
Fitting & Usage – Exitex Capex Snap Down Glazing Bar
Quick Installation Guide
(General guide – not full fitting instructions)
  1. Cut to Length – Trim Base Bar and Top Capping to match the polycarbonate sheet.
  2. Fit Gaskets – Insert EPDM rubber gaskets along each side of the Base Bar.
  3. Pre-Drill & Fix – Drill fixing holes max 500mm apart (within 100mm of ends) and screw Base Bar to rafters with 5mm wood screws.
  4. Prepare Sheets – Remove protective film from sheet edges.
  5. Snap on Top Capping – Push legs into the Base Bar up-stand to form a tight seal.
  6. Seal Ends – Apply silicone under end closure and End Cap top lip, then fit firmly.
Tips:
  • Allow 50mm sheet overhang into gutter.
  • Deduct 21mm from rafter centres for expansion.
  • Use fixing buttons for large or exposed areas.
  • Works best on roofs over 5° pitch.
Select options This product has multiple variants. The options may be chosen on the product page
Quick view
Grey glazing bar

Anthracite Grey Timber Support Glazing Bars

Price range: £25.56 through £61.38 Including VAT
Exitex Capex Snap Down Glazing Bar (10–25mm) – Choice of Colour and Length Grey Timber Support Glazing Bar Low cost,
Select options This product has multiple variants. The options may be chosen on the product page
Quick view
Aluminium F-Section

Aluminium F-Section For Polycarbonate Sheets

Price range: £30.96 through £92.40 Including VAT
Aluminium F-Section
Select options This product has multiple variants. The options may be chosen on the product page
Quick view

PVC End Sheet Closures

Price range: £5.39 through £8.89 Including VAT
Select options This product has multiple variants. The options may be chosen on the product page
Quick view

Pack of 10 Fixing Buttons

£4.98 Including VAT
Fixing buttons for fixing polycarbonate to timber, available in different colours and sizes to suit your needs.
Select options This product has multiple variants. The options may be chosen on the product page
Quick view

Timber Support Glazing Bar Extra End Cap

Price range: £2.59 through £3.74 Including VAT
Select options This product has multiple variants. The options may be chosen on the product page
Quick view

UPVC F-Sections for Polycarbonate Sheets

Price range: £11.54 through £15.96 Including VAT
Select options This product has multiple variants. The options may be chosen on the product page
Quick view