Aluminium F-Section
Click to enlarge
UPVC F-Sections for Polycarbonate Sheets
UPVC F-Sections for Polycarbonate Sheets Price range: £11.54 through £15.96 Including VAT
Back to products
Multipanel Blizzard Shower Panel
Multipanel Blizzard Shower Panel Price range: £97.80 through £204.00 Including VAT

Aluminium F-Section For Polycarbonate Sheets

Price range: £30.96 through £92.40 Including VAT

Aluminium F-Section

SKU: N/A Category:
Description

Aluminium F-Section

Colour White, Brown, Anthracite Grey
Sheet Thickness 10mm Polycarbonate, 16mm Polycarbonate, 25mm Polycarbonate, 35mm Polycarbonate
Length 3000mm, 4000mm, 5000mm, 6000mm
Additional information
ColourWhite, Brown, Anthracite Grey
Sheet Thickness10mm Polycarbonate, 16mm Polycarbonate, 25mm Polycarbonate, 35mm Polycarbonate
Length3000mm, 4000mm, 5000mm, 6000mm

You may also like…

50mm Rafter Main Bar

,
Price range: £49.45 through £99.82 Including VAT
The Sunwood Range of Timber Supported Products is a branded system of powdercoated aluminium and PVCU Conservatory Roof component parts
Select options This product has multiple variants. The options may be chosen on the product page
Quick view
White glazing bar

White Timber Support Glazing Bars

Price range: £18.36 through £64.38 Including VAT
Fitting & Usage – Exitex Capex Snap Down Glazing Bar
Quick Installation Guide
(General guide – not full fitting instructions)
  1. Cut to Length – Trim Base Bar and Top Capping to match the polycarbonate sheet.
  2. Fit Gaskets – Insert EPDM rubber gaskets along each side of the Base Bar.
  3. Pre-Drill & Fix – Drill fixing holes max 500mm apart (within 100mm of ends) and screw Base Bar to rafters with 5mm wood screws.
  4. Prepare Sheets – Remove protective film from sheet edges.
  5. Snap on Top Capping – Push legs into the Base Bar up-stand to form a tight seal.
  6. Seal Ends – Apply silicone under end closure and End Cap top lip, then fit firmly.
Tips:
  • Allow 50mm sheet overhang into gutter.
  • Deduct 21mm from rafter centres for expansion.
  • Use fixing buttons for large or exposed areas.
  • Works best on roofs over 5° pitch.
Select options This product has multiple variants. The options may be chosen on the product page
Quick view
Brown glazing bar

Brown Timber Support Glazing Bars

Price range: £18.36 through £64.38 Including VAT
Fitting & Usage – Exitex Capex Snap Down Glazing Bar
Quick Installation Guide
(General guide – not full fitting instructions)
  1. Cut to Length – Trim Base Bar and Top Capping to match the polycarbonate sheet.
  2. Fit Gaskets – Insert EPDM rubber gaskets along each side of the Base Bar.
  3. Pre-Drill & Fix – Drill fixing holes max 500mm apart (within 100mm of ends) and screw Base Bar to rafters with 5mm wood screws.
  4. Prepare Sheets – Remove protective film from sheet edges.
  5. Snap on Top Capping – Push legs into the Base Bar up-stand to form a tight seal.
  6. Seal Ends – Apply silicone under end closure and End Cap top lip, then fit firmly.
Tips:
  • Allow 50mm sheet overhang into gutter.
  • Deduct 21mm from rafter centres for expansion.
  • Use fixing buttons for large or exposed areas.
  • Works best on roofs over 5° pitch.
Select options This product has multiple variants. The options may be chosen on the product page
Quick view

Pack of 10 Fixing Buttons

£4.98 Including VAT
Fixing buttons for fixing polycarbonate to timber, available in different colours and sizes to suit your needs.
Select options This product has multiple variants. The options may be chosen on the product page
Quick view

    Related products

    Grey glazing bar

    Anthracite Grey Timber Support Glazing Bars

    Price range: £25.56 through £61.38 Including VAT
    Exitex Capex Snap Down Glazing Bar (10–25mm) – Choice of Colour and Length Grey Timber Support Glazing Bar Low cost,
    Select options This product has multiple variants. The options may be chosen on the product page
    Quick view
    White glazing bar

    White Timber Support Glazing Bars For 25mm & 35mm Polycarbonate

    Price range: £32.71 through £78.54 Including VAT
    Exitex Capex Snap Down Glazing Bar (25–35mm) – Choice of Colour and Length White 25-35mm Glazing Bar Low cost, high
    Select options This product has multiple variants. The options may be chosen on the product page
    Quick view
    Brown glazing bar

    Brown Timber Support Glazing Bars For 25mm & 35mm Polycarbonate

    Price range: £32.71 through £78.54 Including VAT
    Exitex Capex Snap Down Glazing Bar (25–35mm) – Choice of Colour and Length Brown 25-35mm Glazing Bar Low cost, high
    Select options This product has multiple variants. The options may be chosen on the product page
    Quick view

    PVC End Sheet Closures

    Price range: £5.39 through £8.89 Including VAT
    Select options This product has multiple variants. The options may be chosen on the product page
    Quick view

    Timber Support Glazing Bar Extra End Cap

    Price range: £2.59 through £3.74 Including VAT
    Select options This product has multiple variants. The options may be chosen on the product page
    Quick view

    UPVC F-Sections for Polycarbonate Sheets

    Price range: £11.54 through £15.96 Including VAT
    Select options This product has multiple variants. The options may be chosen on the product page
    Quick view

    33 Metres of Aluminium Solid Tape

    Price range: £4.50 through £6.98 Including VAT
    Select options This product has multiple variants. The options may be chosen on the product page
    Quick view

    33 Metres of Anti Dust Breather Tape

    Price range: £8.48 through £15.08 Including VAT
    This tape will prevent dust & insects from entering the flute chambers of the polycarbonate sheet whilst allowing condensation to evaporate. Tape should be fitted to the lower end of the sheets (nearest to the gutter)
    Select options This product has multiple variants. The options may be chosen on the product page
    Quick view