Hot
6mm Clear Multiwall Polycarbonate Sheet Standard Sizes
Price range: £5.02 through £90.42 Including VAT
10mm Bronze Multiwall Polycarbonate Sheet Standard Sizes
Price range: £13.44 through £220.50 Including VAT
10mm Clear Multiwall Polycarbonate Sheet Standard Sizes
Price range: £13.44 through £220.80 Including VAT
10mm Clear Multiwall Polycarbonate are great for greenhouse glazing, carports, canopies and conservatories. You can buy the exact size you require, cut to size, which cuts down on price and wastage. Polycarbonate rectangles come in a range of colours from clear to bronze and opal/white. Below are different options depending on what the polycarbonate is going to be used for.
Description
10mm Clear Multiwall Polycarbonate
Chemical Resistance
Polycarbonate has good resistance to many chemicals. Some chemicals may harm the polycarbonate sheets. Please contact us when in doubt about any chemical.
Handling and storage
Poly sheets should be transported and stored horizontally, on a flat, sturdy pallet whose dimensions are equal to or larger than the sheets themselves. The sheets must be secured and fastened to the pallet during transportation and handling on site. It is possible to stack the sheets with the longer sheets at the bottom and the shorter on top, leaving no unsupported overhang.
Additional information
| Width (mm) | 600mm, 700mm, 900mm, 980mm, 1050mm, 1200mm, 1400mm, 2100mm |
|---|---|
| Length (mm) | 1500mm, 2000mm, 2500mm, 3000mm, 3500mm, 4000mm, 4500mm, 5000mm, 7000mm |
You may also like…
White Timber Support Glazing Bars
Fitting & Usage – Exitex Capex Snap Down Glazing Bar
Quick Installation Guide
(General guide – not full fitting instructions)
-
Cut to Length – Trim Base Bar and Top Capping to match the polycarbonate sheet.
-
Fit Gaskets – Insert EPDM rubber gaskets along each side of the Base Bar.
-
Pre-Drill & Fix – Drill fixing holes max 500mm apart (within 100mm of ends) and screw Base Bar to rafters with 5mm wood screws.
-
Prepare Sheets – Remove protective film from sheet edges.
-
Snap on Top Capping – Push legs into the Base Bar up-stand to form a tight seal.
-
Seal Ends – Apply silicone under end closure and End Cap top lip, then fit firmly.
Tips:
-
Allow 50mm sheet overhang into gutter.
-
Deduct 21mm from rafter centres for expansion.
-
Use fixing buttons for large or exposed areas.
-
Works best on roofs over 5° pitch.
Brown Timber Support Glazing Bars
Fitting & Usage – Exitex Capex Snap Down Glazing Bar
Quick Installation Guide
(General guide – not full fitting instructions)
-
Cut to Length – Trim Base Bar and Top Capping to match the polycarbonate sheet.
-
Fit Gaskets – Insert EPDM rubber gaskets along each side of the Base Bar.
-
Pre-Drill & Fix – Drill fixing holes max 500mm apart (within 100mm of ends) and screw Base Bar to rafters with 5mm wood screws.
-
Prepare Sheets – Remove protective film from sheet edges.
-
Snap on Top Capping – Push legs into the Base Bar up-stand to form a tight seal.
-
Seal Ends – Apply silicone under end closure and End Cap top lip, then fit firmly.
Tips:
-
Allow 50mm sheet overhang into gutter.
-
Deduct 21mm from rafter centres for expansion.
-
Use fixing buttons for large or exposed areas.
-
Works best on roofs over 5° pitch.
Related products
6mm Clear Multiwall Polycarbonate Sheet Standard Sizes
Multiwall polycarbonate sheets are great for greenhouse glazing, carports, canopies and conservatories. You can buy the exact size you require, cut to size, which cuts down on price and wastage. Polycarbonate rectangles come in a range of colours from clear to bronze and opal/white. Below are different options depending on what the polycarbonate is going to be used for.
10mm Bronze Multiwall Polycarbonate Sheet Standard Sizes
10mm Bronze Multiwall Polycarbonate are great for greenhouse glazing, carports, canopies and conservatories. You can buy the exact size you require, cut to size, which cuts down on price and wastage. Polycarbonate rectangles come in a range of colours from clear to bronze and opal/white. Below are different options depending on what the polycarbonate is going to be used for.
10mm Opal Multiwall Polycarbonate Sheet Standard Sizes
10mm Opal Multiwall Polycarbonate Sheets are great for greenhouse glazing, carports, canopies and conservatories. You can buy the exact size you require, cut to size, which cuts down on price and wastage. Polycarbonate rectangles come in a range of colours from clear to bronze and opal/white. Below are different options depending on what the polycarbonate is going to be used for.
16mm Clear Multiwall Polycarbonate Sheet Standard Sizes
16mm Clear Multiwall Polycarbonate sheets are great for greenhouse glazing, carports, canopies and conservatories. You can buy the exact size you require, cut to size, which cuts down on price and wastage. Polycarbonate rectangles come in a range of colours from clear to bronze and opal/white. Below are different options depending on what the polycarbonate is going to be used for.
16mm Opal Multiwall Polycarbonate Sheet Standard Sizes
16mm Opal Multiwall Polycarbonate sheets are great for greenhouse glazing, carports, canopies and conservatories. You can buy the exact size you require, cut to size, which cuts down on price and wastage. Polycarbonate rectangles come in a range of colours from clear to bronze and opal/white. Below are different options depending on what the polycarbonate is going to be used for.
25mm Clear Multiwall Polycarbonate Sheet Standard Sizes
25mm Clear Multiwall Polycarbonate sheets are great for greenhouse glazing, carports, canopies and conservatories. You can buy the exact size you require, cut to size, which cuts down on price and wastage. Polycarbonate rectangles come in a range of colours from clear to bronze and opal/white. Below are different options depending on what the polycarbonate is going to be used for.
25mm Opal Multiwall Polycarbonate Sheet Standard Sizes
25mm Opal Multiwall Polycarbonate are great for greenhouse glazing, carports, canopies and conservatories. You can buy the exact size you require, cut to size, which cuts down on price and wastage. Polycarbonate rectangles come in a range of colours from clear to bronze and opal/white. Below are different options depending on what the polycarbonate is going to be used for.
35mm Opal Multiwall Polycarbonate Sheet Standard Sizes
35mm Opal Multiwall Polycarbonate Sheets are great for greenhouse glazing, carports, canopies and conservatories. You can buy the exact size you require, cut to size, which cuts down on price and wastage. Polycarbonate rectangles come in a range of colours from clear to bronze and opal/white. Below are different options depending on what the polycarbonate is going to be used for.